Back

2019 Land Pride RC4620 Rotary Cutter RC4620

LOCATION: MARIANNA, FL
MoreLess
Limited Time Offer!

Selling Price -$18,000.00
No Images Available

Selling Price -

$18,000.00

HD Certified Pre-Owned
Used 2019 Landpride RC4260 Flexwing
20' Cut Width
2" to 12" Cut Height
3" Cut Capacity
Minimum 70 HP
21" Laminated Wheels
Dual Center and Wing Axles
540 PTO
Paired Wing Control
2 Hydraulic Hoses
Weight 6,540 lbs
  • 2019
  • Land Pride
  • RC4620 Rotary Cutter
  • RC4620
  • Rotary Cutters
  • Tractor: 70 hp (52.2 kw) to 250 hp (186.4 kw)
  • Splitter: 250 hp (186.4 kw) | Center & Wing: 210 hp (156.6 kw)
  • Gearbox: Gear Lube 80-90W EP
  • Input: ASAE Cat. 6 with constant velocity u-joint | Intermediate & Wing: Cat. 5 with slip-clutch
  • Blade Tip: Up to 17,000 fpm (86.4 mps)
  • Wing Folding: Two 3" x 12" single-acting hydraulic cylinders complete with hoses & fittings.
  • Center Deck: 3 1/4" x 8" Rephasing hydraulic cylinder with hoses, fittings & stroke control spacers. | Right Wing: 3" x 8" Rephasing hydraulic cylinder with hoses & fittings. | Left Wing: 2 3/4" x 8" Rephasing hydraulic cylinder with hoses & fittings.
  • Self-Leveling Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
  • Transport: Spring-cushioned on center transport axle.
  • Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts.
  • Side Skirt: 1/4" (6 mm) plate. | Stump Jumper / Blade Holder: 1" (2.5 cm) Thick diamond blade bar
  • 1 - Piece, 10 gauge (3.4 mm)
  • Cutting Capacity: 3" (7.6 cm) | Axle Fasteners: 1 1/4" (3.2 cm) Greasable pins
  • 20' - 0" (6.1 m)
  • 21' - 0 1/2" (6.41 m)
  • Minimum With cutting height at 2" (5.1 cm): 9' - 11" (3.02m)
  • With cutting height at 2" (5.1 cm): 17' - 8 1/2" (5.4 m)
  • 13" (33 cm)
  • 2" (5.1 cm) to 12" (30.5 cm)
  • Divider Gearbox: 6.2 Pints (2.93 L) | Center deck, LH deck & RH deck spindle gearboxes: 4.7 Pints (4.7 L)
  • Jack: 7,000 lbs (3175.1 kg)
  • Total: 6,540 lb (2966.5 kg) Front & rear single chain guards, 6 - AC/FF tires, CV Driveline, standard clevis, & diamond blade bar with dishpan. | Tongue: 2,160 lb (979.8 kg)
  • Signal lights: LED | 7 Pin connector: SAE J560 pin configuration
  • Wing Flex: 45° up, 20° down while cutting. | Skid Shoes Wing Deck: Reversible & Replaceable, 2 straight skid shoes and 2 AR400 leading skid shoes. | Skid Shoes Center Deck: Replaceable, 2 skid shoes | Front & Rear Guards: Single chain or double chain.
  • Six Blades (2 per Carrier): 1/2" (13 mm) x 4" ( 10.2 cm) Heat treated free swinging alloy steel with up lift.
  • Overlap: 6" (15.2 cm) | Bolt: Keyed with hardened flat washer & locknut.
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $18,000.00
  • Marianna FL
  • Pre-Owned
  • 010122747
  • 2019
  • Land Pride
  • RC4620 Rotary Cutter RC4620
  • 1058738
  • 70
  • 0
  • None
  • Available

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.